Care guide

A few minutes of care keeps it looking new.

Everyday

Dust, wipe, dry

Dust weekly with a soft, dry cloth. For marks, use a cloth lightly dampened with water and a drop of mild soap, then dry right away. Avoid harsh cleaners, polish with silicone and abrasive pads.

  1. 1

    Use coasters

    Hot mugs and wet glasses can mark the finish.

  2. 2

    Wipe spills at once

    Don't let water sit on the top or edges.

Raised lip and rounded corner of the Acova nightstand top with reading glasses

The weave and the drawer

Gentle with the weave

Vacuum the rattan-style panel with a soft brush attachment, or wipe with a barely damp cloth. Don't pull at loose strands. If the drawer feels stiff, check that nothing is caught behind it and that the runners are clean.

  1. 1

    Keep out of strong sun

    Direct sun can fade the finish over time.

  2. 2

    Away from heat

    Keep it a little away from radiators and vents.

  3. 3

    Check the screws

    Re-tighten gently every few months.

Drawer on smooth metal runners

After a week

Tighten, once

Wood settles in the first week or two. Give every screw and leg a quarter turn to keep it steady and quiet. Do it again if you move it to a new room.

Open shelf and tapered solid wood leg

Care questions

1 Can I put a glass of water on it?

Yes, with a coaster. The body is engineered wood (MDF) under a walnut-tone finish, and standing water can swell an edge. Wipe spills straight away with a dry cloth.

2 How do I clean the cane panel?

Use a soft brush or the brush attachment of a vacuum, or a barely damp cloth. Avoid soaking it, and don't pull at loose fibers.

3 Will the color fade?

Keep it out of strong, direct sun for long hours, as with any wood-tone finish. Turning it now and then evens out light exposure.

4 What should I avoid?

Harsh cleaners, polish with silicone, heat sources such as radiators, and dragging it across the floor.